Imprinted Concrete Donore, County Meath


Patterned Imprinted Concrete Driveways Donore, County Meath


With over 10 years of encounter in concrete market, PaveLink Concrete has been providing best and top quality concrete services in really competitve price tag in all over Donore, County Meath places . Depending on a Donore, County Meath area We can help you with any concrete services be it New Concrete Driveway paving ,Patterned Driveway or Stenciled Concrete Driveways ,Coloured Concrete Driveways or Concrete Driveways Repairing. Give us a call for our no obligation free quote for any of your concrete services. We are a Totally Licensed, Insured & Family Owned Concreting Business.

Hi, this is Chris I’m the owner of concrete driveways Donore, County Meath
Thanks for checking out my website. I guess you’re thinking of installing a concrete driveway concrete pathway or maybe even a concrete slab. There’s no doubt that a good quality concrete driveway, constructed properly with steel reinforcement adds immense value to your home and will bring years of practical enjoyment and use. In fact just recently one customer who hired our concrete driveways Donore, County Meath company to install a beautiful new concrete driveway sold his home for over 58,000 euro more than he expected! The agent said the new concrete driveway “made all the difference”.


The Patterned Imprinted Concrete Driveways Design Specialists are a Licensed & Insured Company of Experienced Driveway Designers and Master Tradesmen who’ve been installing impressive, high good quality driveways for happy clients in Donore, County Meath for the last 10 years. Recognized for their excellence in Superior Good quality Decorative Driveways Of All Styles, colours and patterns.

Concrete Driveways
Add value and appeal to your driveway.

Stamped Driveway
Stamped Concrete Driveway – Create designs and patterns that leave behind realistic slate impressions.

Stenciled Concrete
Stenciled Concrete – Designed to resemble brick, slate, flagstone, stone & tile achieving a high-end finish.

Spraytech – Council preferred concrete resurfacing contractor.

Concrete Resurfacing – a cost-effective way to dramatically enhance any concrete surface.

The Concrete Design Specialists focus on attention to detail, which is why their workmanship is superior compared to others.
They take pride in providing Attractive, Durable and Strong Driveways, guaranteeing you the highest top quality materials & workmanship.

PaveLink Creating Donore, County Meath Driveways & Servicing Donore, County Meath for the last 10, years with 20yrs in the concrete market There is no doubt that a properly constructed driveway will add immense value (in most cases) to your largest asset, your home. Concrete driveways permanently improve the property’s appearance & they are a low maintenance option. So, if you are thinking of installing a concrete driveway or a concrete pathway, sealing a concrete driveway or even need a concrete slab, And I’m sure you will have some questions about costs, so please feel free to contact me.

We’re Donore, County Meath Very best Concrete Driveways Contractors Company

Our concrete driveways are designed to perform well for many years to come and to always look their most effective. To this end, we have become real experts in the field of decorative concrete driveways. Decorative concrete will provide a professional long lasting appearance and these days, you are only limited by your imagination. If you want the unique look of conventional floor tiles, brick or block paving, and other custom finishes, it can be achieved quickly and cost-effectively. And the best part is that as well as a distinctive contemporary look, you’ll have the added advantage of no weeds growing through the cracks. We can show you some amazing designs according to Concrete Stencilling, Stamped Concrete (available in a range of patterns and textures) and Coloured Concrete in a wide choice of modern colours

Pavelink Concreting Services Include:

Concrete Slabs Concrete Driveways Stencil Concrete Retaining Walls Concrete Cleaning
Stamped Concrete Decorative Concrete Concrete Sealing Concrete Stencilling Pattern Concrete
Driveway Cleaning Driveway Sealing Coloured Concrete And much more!

Our Commitment To You

We provide you peace of mind with our “7 Year Works Guarantee“.
We offer friendly service and guidance.
All works have total excellent control and direct supervision
You are provided with direct mobile contact 24/7 to their dedicated works supervisor.
We engage only the very best tradesmen & materials.
We work within strict time-limits (Yes…that’s your time limits).
We do everything possible to meet your expectations.
All our staffs are highly qualified clean, skilled, Friendly, professional, and well mannered .
PaveLink are expert Concreters with years of expertise, able to fulfill all your concreting needs.We do all kind of concrete work such as driveways paths extensions all finishes on concrete e.g(colour, stamp or stencil), house slabs garages retaining walls,commercial and industrial.Also we do all excavation work including pier holes,concrete repair and resurfacing.
House slabs start soon after plans are received we take care and great pride in our work, everything done professionally.

  • We are a family owned business with more than 10 years of experiences.
  • We are fully licensed and insured. We also take care of council approvals.
  • We will send no obligation s written quotes!
  • We give advice on the greatest way to approach a job E.G (old driveways to new driveways)
  • All jobs sites are left tidy and clean after work has been completed .
  • For commercial and industrial job site we’re fully insured and all members are in possession of green cards.
  • Our Prices are Competitive And Reasonable .

Donore (Irish: Dún Uabhair, meaning “Fort of pride”),[1] historically Dunower, is a small village near Drogheda in County Meath, Ireland. It lies on the Meath–Louth border in the Boyne Valley on the road between Drogheda and the Brú na Bóinne heritage site. Donore is only 2 km from the visitors’ centre at Brú na Bóinne. During the late 17th century, the village was used as a defensive position by the Jacobite army of King James II against King William III during the Battle of the Boyne (1690). The Battle of the Boyne between King William III and his father-in-law, King James II, was fought on 1 July 1690 (11 July according to our modern calendar). Both kings commanded their armies in person, 36,000 on the Williamite side and 25,000 on the Jacobite side – the largest number of troops ever deployed on an Irish battlefield. At stake were the British throne, French dominance in Europe and power in Ireland. The Battle of the Boyne Visitor Centre is located in the recently restored 18th century Oldbridge House, which is on the battlesite. Free access to the battlesite, parklands and the formal gardens.

The village has undergone much growth in recent years as a result of its location near the recent extension of the M1 motorway, and now has a pub and restaurant, shops, a pharmacy, a take-away and a hairdresser.

A Guide to Pattern Imprint Concrete for your Driveway


Detailed Guide To: Ways To Sucessfully Imprint Concrete

There are several of steps involved in inscribing concrete, and just a tiny time structure within which to obtain them done. This is not such as when applying an ornamental layer or stain to concrete paving, those who perform the work have to finish the whole pattern inscribed technique before the fresh concrete sets. To do the task well, service providers must be experienced, arranged, and extremely prepared. For big tasks specifically, that means diagraming the imprinting format ahead of time, having the imprinting devices aligned and all set to go, and seeing to it sufficient labor is readily available for the job available.

Adding Colour Hardener

After the concrete gets to the appropriate phase of plasticity (generally when no bleedwater gets on the surface area), broadcast the color hardener by tossing it onto the surface from waist level or a little bit lower to lessen the quantity of product that drifts right into the air. Work from the middle of the concreted area and back toward the side develops to avoid a heavy accumulation of color hardener on the brink. After the very first shake of color hardener has actually been put on the surface area, provide it 5 to 10 mins to absorb water from the concrete and after that drift it right into the surface. Right after bull floating the initial application of color hardener, adhere to the same actions and apply a 2nd layer of hardener to make certain complete protection.

Including The Release Agent

Powdered or fluid release agents serve 2 important purposes: They impart refined color contrast while working as a bond breaker to avoid the inscribing mats or skins from sticking to the concrete and disrupting the imprint texture. The most effective method to use a powdered launch is with a completely dry tampico brush concerning 8 inches large. Dip the brush right into the pail of launch and fluff it to pack the bristles and layer them evenly. Then take the brush by the handle, holding it below belt level, and use your wrist to flick the release into the surface area in a light, uniform layer.

To apply a fluid release agent, make use of a pump-type sprayer to use the release in a consistent layer into the surface of the concrete right prior to you mark. If you intend to use a colored liquid launch agent, include the tint a day or two beforehand when possible. This will enable the pigment bits to completely liquify.

Examining If The Concrete Is Ready?

Prior to you start inscribing, examine to see that the concrete has actually reached the ideal phase of plasticity. If you begin imprinting too soon, the concrete won’t be strong adequate to support the weight of workers or hold a distinct imprint. If you start imprinting far too late, not just will inscribing need more work, you’ll generate little or no appearance with the imprint stamps, specifically as you reach completion of the job. Press your fingers into the concrete surface at a number of places on the concreted location. If you leave a clean imprint regarding 3/16 to 1/4 inch deep, you could generally start inscribing. An additional test is to put a stamp on the concrete and action on it. The stamp should hold your weight and not move around or sink as well deeply right into the surface area.

Before imprinting, pretexture along the perimeter of the concreted area with a texturing skin or flex floor covering.

Pretexture The Concreted Area Perimeter

Pretexture along the perimeter edges of the concreted area about 6 to 12 inches inward with a texturing skin or flex mat. This action is necessary because when you’re working with a nonflexible stamp, the tool will overlap the edge of the form and you wonâEUR ™ t be able to completely dispirit it into the concrete surface area. By pretexturing the perimeter initially, you’ll get the texture you need and the full color from the release.

The First Row Of Imprint Stamps

When the edges are pretextured, the staff could begin inscribing the remainder of the concreted area with the mat devices. Generally, you ought to stamp in the same sequence that you put and finished the concrete. For instance, if you started placing the concrete in the leading left-hand corner of the concreted location and upright the lower appropriate corner, this would be the preferred series to use for ending up and imprinting procedures, functioning row by row from the starting indicate the end factor. A lot of stamp sets are identified with letters or numbers. Constantly set up the imprint stamps in the series advised by the supplier, such as ‘A’, ‘B’, ‘C’ or ‘1’, ‘2’, ‘3’.

It’s vital to put the initial row of imprint stamps on a straight line since that will work as the standard for the remainder of the job. If it’s not flawlessly directly, the rest of the rows will be out of alignment also. Utilize a string line as a guide, especially for lining up stamp patterns that are square or rectangle-shaped. For scratched or irregular stamp patterns, you can check placement by utilizing the edge type as a reference factor (assuming that it’s square). Use a string line or measuring tape and run it from the side of the type to the leading and lower sides of the stamp mat making certain the device is running square about the form.

The Imprinting Sequence

If the concrete is at the optimal phase for imprinting, you ought to be able to thrill the imprint stamps into the surface area by just strolling on the devices, possibly complied with by a light tamping. The inscribing staff should finish the very first row before moving on to the 2nd one. Normally, a single person will put the starter devices and stand on them while getting hold of imprint stamps from the initial row and leapfrogging them right into the following row. While he or she is moving and advancing the tools, an additional person can do the tamping. Depending on the stamp pattern, a 3rd person may be had to information the grout joints.

Required Detailing Work

Also if you have pretextured the edges and utilized a flex mat against wall surfaces, you will usually find it necessary to do some detailing with a hand sculpt, roller, or appearance skin to eliminate displaced cement paste that turns up via the joints between imprint stamps, to fix any kind of obscured pattern lines, and to remedy grout joints where the stamp had not been tamped down with enough stress. With the majority of stamp patterns, you’ll achieve much better outcomes if you detail the same day, either as the imprint stamps are being progressed or prior to going house at the end of the day. For touching up or repairing small surface area problems, you could use a structure skin as an eraser to fix disproportion or nonuniformity by patting it right into the location until it’s level and afterwards reimprinting with the suitable mat tool.

Removal Of Excess Release Agent And Addition Of Curing Compound

If you’ve applied a tinted launch powder to the concrete surface area, you can’t apply a treating compound until you wash off the recurring launch agent-a minimum of eventually and in many cases 2 or three days later, depending on weather conditions. When the surface area is adequately cleaned and allowed to completely dry, you could after that spray on a fluid membrane-forming treating substance or a treatment and seal to keep moisture in the concrete. If you’re utilizing a clear or tinted fluid launch, you could typically use the curing membrane to the concreted location the very same day. Examine the release supplier’s suggestions for treating.

Adding Joints

Cutting contraction joints (likewise called control joints) at the correct depth and spacing in the concreted location soon after placement offers stress alleviation at prepared places and prevents unrestrained random fracturing. You could create joints in the concrete as it starts to establish utilizing a groover or you can wait to cut the joint until after the concrete has set utilizing a saw furnished with a ruby or rough blade. Usually, a sawed joint is much less recognizable than grooving.

Including Sealant

Once the concreted area has actually cured completely, you need to apply a finish coat of sealant. A lot of producers recommend applying the sealer numerous weeks later, after a light surface cleaning. Be careful not to apply the sealant as well heavily, which might catch wetness in the concreted area. One of the most effective methods for applying sealer is to integrate both spraying and rolling, particularly when the stamped pattern has deep cement lines. Going back over the surface area with a roller where essential helps to distribute the sealer consistently.

Pattern Imprinted Paving Tips

Here are some valuable ideas:

  • If you’re making use of a brand-new stamp pattern for the very first time, practice with the tools on compacted sand before using them in concrete;
  • Avoid pattern repeating, particularly with patterns that mimic natural products such as rock or slate. A random structure will certainly look much more reasonable;
  • You’ll get better outcomes if you precondition, or layer, your stamp floor coverings with several of the release agent. This will certainly provide added bond damaging to assist make certain a clean imprint;
  • To acquire an arbitrary antiquing effect, apply a very small amount of powdered launch to the surface area of the concrete and afterwards spray the fluid release over the top of it. The fluid liquifies the light layer of powder to leave refined accents after the surface is stamped;
  • Be sure the release agent gets well-compressed into the concrete by the stamp. Or else, it will simply wash off the surface without leaving the preferred colour;
  • Periodically inspect the positioning of the imprint stamps every few rows utilizing a string line. It’s not uncommon for imprint stamps to move as long as 1/4 inch per row, especially on sloped areas;
  • On many jobs, you’ll be confronted with having to mark up against an upright surface, such as a wall surface or a column. Make use of a saggy mat and texturing to bend or flex against these surface areas;
  • Be sure that the person walking on and moving the imprint stamps is wearing clean boots or work shoes, without any kind of stones, mud, or various other debris.
  • Unavoidably, these impurities will certainly end up on top of the imprint stamps and drop into the fresh concrete surface as the imprint stamps are being lifted;
  • If you’re utilizing a powdered release, you can save time by sawcutting the tightening joints prior to getting rid of the launch. This permits you to eliminate the release deposit and the dirt created from sawing in one action.
Call Now Button