Imprinted Concrete Annacurra


Patterned Imprinted Concrete Driveways Annacurra


With over 10 years of encounter in concrete market, PaveLink Concrete has been providing best and top quality concrete services in really competitve price tag in all over Annacurra places . Depending on a Annacurra area We can help you with any concrete services be it New Concrete Driveway paving ,Patterned Driveway or Stenciled Concrete Driveways ,Coloured Concrete Driveways or Concrete Driveways Repairing. Give us a call for our no obligation free quote for any of your concrete services. We are a Totally Licensed, Insured & Family Owned Concreting Business.

Hi, this is Chris I’m the owner of concrete driveways Annacurra
Thanks for checking out my website. I guess you’re thinking of installing a concrete driveway concrete pathway or maybe even a concrete slab. There’s no doubt that a good quality concrete driveway, constructed properly with steel reinforcement adds immense value to your home and will bring years of practical enjoyment and use. In fact just recently one customer who hired our concrete driveways Annacurra company to install a beautiful new concrete driveway sold his home for over 58,000 euro more than he expected! The agent said the new concrete driveway “made all the difference”.


The Patterned Imprinted Concrete Driveways Design Specialists are a Licensed & Insured Company of Experienced Driveway Designers and Master Tradesmen who’ve been installing impressive, high good quality driveways for happy clients in Annacurra for the last 10 years. Recognized for their excellence in Superior Good quality Decorative Driveways Of All Styles, colours and patterns.

Concrete Driveways
Add value and appeal to your driveway.

Stamped Driveway
Stamped Concrete Driveway – Create designs and patterns that leave behind realistic slate impressions.

Stenciled Concrete
Stenciled Concrete – Designed to resemble brick, slate, flagstone, stone & tile achieving a high-end finish.

Spraytech – Council preferred concrete resurfacing contractor.

Concrete Resurfacing – a cost-effective way to dramatically enhance any concrete surface.

The Concrete Design Specialists focus on attention to detail, which is why their workmanship is superior compared to others.
They take pride in providing Attractive, Durable and Strong Driveways, guaranteeing you the highest top quality materials & workmanship.

PaveLink Creating Annacurra Driveways & Servicing Annacurra for the last 10, years with 20yrs in the concrete market There is no doubt that a properly constructed driveway will add immense value (in most cases) to your largest asset, your home. Concrete driveways permanently improve the property’s appearance & they are a low maintenance option. So, if you are thinking of installing a concrete driveway or a concrete pathway, sealing a concrete driveway or even need a concrete slab, And I’m sure you will have some questions about costs, so please feel free to contact me.

We’re Annacurra Very best Concrete Driveways Contractors Company

Our concrete driveways are designed to perform well for many years to come and to always look their most effective. To this end, we have become real experts in the field of decorative concrete driveways. Decorative concrete will provide a professional long lasting appearance and these days, you are only limited by your imagination. If you want the unique look of conventional floor tiles, brick or block paving, and other custom finishes, it can be achieved quickly and cost-effectively. And the best part is that as well as a distinctive contemporary look, you’ll have the added advantage of no weeds growing through the cracks. We can show you some amazing designs according to Concrete Stencilling, Stamped Concrete (available in a range of patterns and textures) and Coloured Concrete in a wide choice of modern colours

Pavelink Concreting Services Include:

Concrete Slabs Concrete Driveways Stencil Concrete Retaining Walls Concrete Cleaning
Stamped Concrete Decorative Concrete Concrete Sealing Concrete Stencilling Pattern Concrete
Driveway Cleaning Driveway Sealing Coloured Concrete And much more!

Our Commitment To You

We provide you peace of mind with our “7 Year Works Guarantee“.
We offer friendly service and guidance.
All works have total excellent control and direct supervision
You are provided with direct mobile contact 24/7 to their dedicated works supervisor.
We engage only the very best tradesmen & materials.
We work within strict time-limits (Yes…that’s your time limits).
We do everything possible to meet your expectations.
All our staffs are highly qualified clean, skilled, Friendly, professional, and well mannered .
PaveLink are expert Concreters with years of expertise, able to fulfill all your concreting needs.We do all kind of concrete work such as driveways paths extensions all finishes on concrete e.g(colour, stamp or stencil), house slabs garages retaining walls,commercial and industrial.Also we do all excavation work including pier holes,concrete repair and resurfacing.
House slabs start soon after plans are received we take care and great pride in our work, everything done professionally.

  • We are a family owned business with more than 10 years of experiences.
  • We are fully licensed and insured. We also take care of council approvals.
  • We will send no obligation s written quotes!
  • We give advice on the greatest way to approach a job E.G (old driveways to new driveways)
  • All jobs sites are left tidy and clean after work has been completed .
  • For commercial and industrial job site we’re fully insured and all members are in possession of green cards.
  • Our Prices are Competitive And Reasonable .

Annacurra (Irish: Áth na gCurraigh) is a small village in South-East County Wicklow, Ireland. It is located just off the R747 road which runs from Arklow to Baltinglass and is about 1.5 miles from Aughrim. The River Derry runs through the village.

A Guide to Pattern Imprint Concrete for your Driveway


Step By Step Overview of: How You Can Sucessfully Imprint Concrete

There are several of actions associated with imprinting concrete, and just a little time framework within which to obtain them done. This is not such as when applying an ornamental finishing or stain to concrete paving, those who execute the work have to complete the whole pattern imprinted approach before the fresh concrete sets. To do the job well, service providers must be experienced, organized, and really ready. For big projects in particular, that indicates diagraming the imprinting layout beforehand, having the imprinting devices aligned and prepared to go, and seeing to it enough labor is available for the work at hand.

Including Colour Hardener

After the concrete gets to the right phase of plasticity (normally when no bleedwater is on the surface area), relayed the color hardener by tossing it into the surface from waistline degree or a bit lower to reduce the amount of material that wanders into the air. Job from the middle of the concreted area and back towards the edge develops to avoid a hefty buildup of color hardener on the edges. After the first shake of color hardener has actually been put on the surface area, provide it 5 to 10 mins to take in water from the concrete and afterwards float it right into the surface. Right after bull drifting the very first application of shade hardener, comply with the same steps and use a second layer of hardener to guarantee total insurance coverage.

Including The Release Agent

Powdered or liquid release agents serve two vital objectives: They convey refined shade comparison while serving as a bond breaker to prevent the imprinting mats or skins from sticking to the concrete and disrupting the imprint texture. The most effective way to apply a powdered release is with a dry tampico brush concerning 8 inches large. Dip the brush into the pail of release and fluff it to fill the bristles and layer them evenly. Then take the brush by the deal with, holding it listed below belt level, and use your wrist to snap the launch into the surface area in a light, uniform layer.

To use a liquid release agent, make use of a pump-type sprayer to use the release in an uniform layer into the surface of the concrete right prior to you mark. If you prepare to utilize a tinted liquid release agent, include the tint a day or two ahead of time when possible. This will enable the pigment bits to completely dissolve.

Examining If The Concrete Is Ready?

Before you start imprinting, check to see that the concrete has actually reached the ideal phase of plasticity. If you start inscribing prematurely, the concrete won’t be strong sufficient to sustain the weight of workers or hold a distinct imprint. If you start imprinting far too late, not just will imprinting require more job, you’ll produce little or no appearance with the imprint stamps, especially as you reach the end of the job. Press your fingers into the concrete surface area at numerous places on the concreted area. If you leave a clean imprint concerning 3/16 to 1/4 inch deep, you can normally begin inscribing. Another examination is to put a stamp on the concrete and action on it. The stamp ought to hold your weight and not move around or sink also deeply into the surface.

Before inscribing, pretexture along the border of the concreted location with a texturing skin or flex floor covering.

Pretexture The Concreted Area Perimeter

Pretexture along the perimeter edges of the concreted area about 6 to 12 inches inward with a texturing skin or flex floor covering. This step is important because when you’re collaborating with a nonflexible stamp, the tool will overlap the side of the form and you wonâEUR ™ t be able to completely depress it right into the concrete surface area. By pretexturing the boundary initially, you’ll obtain the structure you need and the complete shade from the release.

The First Row Of Imprint Stamps

As soon as the sides are pretextured, the team could start imprinting the remainder of the concreted area with the mat tools. Generally, you ought to stamp in the exact same sequence that you put and ended up the concrete. For example, if you began placing the concrete in the top left-hand edge of the concreted area and upright the bottom appropriate corner, this would certainly be the preferred series to make use of for completing and imprinting procedures, functioning row by row from the beginning point to completion factor. The majority of stamp sets are classified with letters or numbers. Constantly organize the imprint stamps in the series advised by the supplier, such as ‘A’, ‘B’, ‘C’ or ‘1’, ‘2’, ‘3’.

It’s important to place the first row of imprint stamps on a straight line since that will act as the criteria for the rest of the task. If it’s not completely right, the remainder of the rows will be out of alignment as well. Utilize a string line as a guide, especially for lining up stamp patterns that are square or rectangular. For scratched or irregular stamp patterns, you can check alignment using the edge kind as a referral factor (assuming that it’s square). Make use of a string line or measuring tape and run it from the side of the form to the leading and lower sides of the stamp mat making certain the tool is running square about the type.

The Imprinting Sequence

If the concrete is at the suitable phase for inscribing, you should have the ability to impress the imprint stamps into the surface by merely strolling on the tools, potentially complied with by a light tamping. The inscribing crew needs to finish the initial row before moving on to the 2nd one. Normally, someone will put the starter tools and stand on them while ordering imprint stamps from the very first row and leapfrogging them into the next row. While this person is moving and advancing the devices, another person can do the tamping. Relying on the stamp pattern, a third person could be should information the cement joints.

Called For Detailing Work

Also if you have pretextured the sides and made use of a flex mat versus wall surfaces, you will frequently locate it required to do some detailing with a hand chisel, roller, or appearance skin to eliminate displaced cement paste that turns up through the joints between imprint stamps, to deal with any type of obscured pattern lines, and to remedy cement joints where the stamp had not been tamped down with enough pressure. With most stamp patterns, you’ll attain far better results if you detail the exact same day, either as the imprint stamps are being progressed or prior to going residence at the end of the day. For retouching or fixing minor surface area defects, you can make use of a structure skin as an eraser to remedy unevenness or nonuniformity by patting it into the area till it’s degree and afterwards reimprinting with the suitable mat tool.

Removal Of Excess Release Agent And Addition Of Curing Compound

If you’ve applied a tinted release powder to the concrete surface, you can’t apply a healing substance until you wash off the residual release agent-a minimum of someday and in some cases two or 3 days later on, depending upon climate condition. Once the surface area is completely cleansed and permitted to dry, you can after that spray on a fluid membrane-forming healing substance or a cure and seal to keep dampness in the concrete. If you’re utilizing a clear or tinted liquid launch, you could normally use the curing membrane layer to the concreted area the same day. Examine the launch supplier’s referrals for treating.

Adding Joints

Cutting tightening joints (also called control joints) at the proper depth and spacing in the concreted location soon after placement supplies tension relief at intended places and prevents unchecked arbitrary fracturing. You can form joints in the concrete as it begins to set making use of a groover or you could wait to cut the joint until after the concrete has actually established making use of a saw equipped with a diamond or rough blade. Typically, a sawed joint is less obvious compared to grooving.

Including Sealant

As soon as the concreted location has actually healed sufficiently, you should apply a coating coat of sealer. Many makers suggest using the sealer a number of weeks later on, after a light surface cleaning. Be careful not to use the sealer too heavily, which might catch moisture in the concreted area. One of the most reliable methods for applying sealant is to integrate both splashing and rolling, especially when the stamped pattern has deep grout lines. Going back over the surface area with a roller where necessary helps to distribute the sealer uniformly.

Pattern Imprinted Paving Tips

Here are some useful ideas:

  • If you’re utilizing a brand-new stamp pattern for the very first time, experiment the tools on compacted sand before using them in concrete;
  • Prevent pattern repetition, particularly with patterns that imitate all-natural materials such as rock or slate. An arbitrary make-up will certainly look far more reasonable;
  • You’ll improve results if you prerequisite, or layer, your stamp floor coverings with a few of the release agent. This will certainly give extra bond breaking to assist ensure a clean imprint;
  • To get an arbitrary antiquing result, apply a very small amount of powdered launch to the surface of the concrete and afterwards spray the fluid launch over the top of it. The fluid liquifies the light layer of powder to leave refined accents after the surface is marked;
  • Be sure the launch agent obtains well-compressed right into the concrete by the stamp. Otherwise, it will merely wash off the surface without leaving the wanted colour;
  • Periodically inspect the positioning of the imprint stamps every couple of rows using a string line. It’s not uncommon for imprint stamps to move as much as 1/4 inch per row, particularly on sloped areas;
  • On several jobs, you’ll be confronted with needing to stamp up against an upright surface area, such as a wall or a column. Make use of a saggy floor covering and texturing to bend or flex up against these surfaces;
  • Make certain that the person walking on and moving the imprint stamps is wearing clean boots or job footwear, devoid of any kind of pebbles, mud, or various other debris.
  • Inevitably, these impurities will certainly end up in addition to the imprint stamps and drop onto the fresh concrete surface as the imprint stamps are being raised;
  • If you’re making use of a powdered launch, you could conserve time by sawcutting the tightening joints before removing the launch. This permits you to get rid of the release residue and the dirt produced from sawing in one step.
Call Now Button