Imprinted Concrete Cornelscourt


Patterned Imprinted Concrete Driveways Cornelscourt


With over 10 years of encounter in concrete market, PaveLink Concrete has been providing best and top quality concrete services in really competitve price tag in all over Cornelscourt places . Depending on a Cornelscourt area We can help you with any concrete services be it New Concrete Driveway paving ,Patterned Driveway or Stenciled Concrete Driveways ,Coloured Concrete Driveways or Concrete Driveways Repairing. Give us a call for our no obligation free quote for any of your concrete services. We are a Totally Licensed, Insured & Family Owned Concreting Business.

Hi, this is Chris I’m the owner of concrete driveways Cornelscourt
Thanks for checking out my website. I guess you’re thinking of installing a concrete driveway concrete pathway or maybe even a concrete slab. There’s no doubt that a good quality concrete driveway, constructed properly with steel reinforcement adds immense value to your home and will bring years of practical enjoyment and use. In fact just recently one customer who hired our concrete driveways Cornelscourt company to install a beautiful new concrete driveway sold his home for over 58,000 euro more than he expected! The agent said the new concrete driveway “made all the difference”.


The Patterned Imprinted Concrete Driveways Design Specialists are a Licensed & Insured Company of Experienced Driveway Designers and Master Tradesmen who’ve been installing impressive, high good quality driveways for happy clients in Cornelscourt for the last 10 years. Recognized for their excellence in Superior Good quality Decorative Driveways Of All Styles, colours and patterns.

Concrete Driveways
Add value and appeal to your driveway.

Stamped Driveway
Stamped Concrete Driveway – Create designs and patterns that leave behind realistic slate impressions.

Stenciled Concrete
Stenciled Concrete – Designed to resemble brick, slate, flagstone, stone & tile achieving a high-end finish.

Spraytech – Council preferred concrete resurfacing contractor.

Concrete Resurfacing – a cost-effective way to dramatically enhance any concrete surface.

The Concrete Design Specialists focus on attention to detail, which is why their workmanship is superior compared to others.
They take pride in providing Attractive, Durable and Strong Driveways, guaranteeing you the highest top quality materials & workmanship.

PaveLink Creating Cornelscourt Driveways & Servicing Cornelscourt for the last 10, years with 20yrs in the concrete market There is no doubt that a properly constructed driveway will add immense value (in most cases) to your largest asset, your home. Concrete driveways permanently improve the property’s appearance & they are a low maintenance option. So, if you are thinking of installing a concrete driveway or a concrete pathway, sealing a concrete driveway or even need a concrete slab, And I’m sure you will have some questions about costs, so please feel free to contact me.

We’re Cornelscourt Very best Concrete Driveways Contractors Company

Our concrete driveways are designed to perform well for many years to come and to always look their most effective. To this end, we have become real experts in the field of decorative concrete driveways. Decorative concrete will provide a professional long lasting appearance and these days, you are only limited by your imagination. If you want the unique look of conventional floor tiles, brick or block paving, and other custom finishes, it can be achieved quickly and cost-effectively. And the best part is that as well as a distinctive contemporary look, you’ll have the added advantage of no weeds growing through the cracks. We can show you some amazing designs according to Concrete Stencilling, Stamped Concrete (available in a range of patterns and textures) and Coloured Concrete in a wide choice of modern colours

Pavelink Concreting Services Include:

Concrete Slabs Concrete Driveways Stencil Concrete Retaining Walls Concrete Cleaning
Stamped Concrete Decorative Concrete Concrete Sealing Concrete Stencilling Pattern Concrete
Driveway Cleaning Driveway Sealing Coloured Concrete And much more!

Our Commitment To You

We provide you peace of mind with our “7 Year Works Guarantee“.
We offer friendly service and guidance.
All works have total excellent control and direct supervision
You are provided with direct mobile contact 24/7 to their dedicated works supervisor.
We engage only the very best tradesmen & materials.
We work within strict time-limits (Yes…that’s your time limits).
We do everything possible to meet your expectations.
All our staffs are highly qualified clean, skilled, Friendly, professional, and well mannered .
PaveLink are expert Concreters with years of expertise, able to fulfill all your concreting needs.We do all kind of concrete work such as driveways paths extensions all finishes on concrete e.g(colour, stamp or stencil), house slabs garages retaining walls,commercial and industrial.Also we do all excavation work including pier holes,concrete repair and resurfacing.
House slabs start soon after plans are received we take care and great pride in our work, everything done professionally.

  • We are a family owned business with more than 10 years of experiences.
  • We are fully licensed and insured. We also take care of council approvals.
  • We will send no obligation s written quotes!
  • We give advice on the greatest way to approach a job E.G (old driveways to new driveways)
  • All jobs sites are left tidy and clean after work has been completed .
  • For commercial and industrial job site we’re fully insured and all members are in possession of green cards.
  • Our Prices are Competitive And Reasonable .

Cornelscourt (Irish: Cúirt an Choirnéil) is a small suburban area of South Dublin, situated between Cabinteely and Foxrock. It has a mostly commercial rather than residential character and is best known for being the site of Ireland’s first big-box store, a branch of Dunnes Stores.

A Guide to Pattern Imprint Concrete for your Driveway


Detailed Overview of: How To Sucessfully Imprint Concrete

There are numerous of steps associated with inscribing concrete, and just a little time structure within which to obtain them done. This is not such as when using a decorative finish or stain to concrete paving, those that perform the job need to complete the whole pattern imprinted approach prior to the fresh concrete collections. To do the work well, contractors need to be experienced, organized, and really ready. For big projects specifically, that implies diagraming the inscribing design beforehand, having the inscribing devices aligned and prepared to go, and making certain enough labor is available for the work at hand.

Including Colour Hardener

After the concrete gets to the ideal phase of plasticity (normally when no bleedwater gets on the surface area), transmitted the shade hardener by throwing it onto the surface from midsection level or a bit reduced to reduce the quantity of material that wanders right into the air. Work from the middle of the concreted area and back towards the edge creates to prevent a heavy buildup of color hardener on the edges. After the first shake of shade hardener has been related to the surface area, give it 5 to 10 mins to soak up water from the concrete and then float it into the surface area. Right after bull floating the first application of shade hardener, adhere to the exact same steps and apply a 2nd layer of hardener to make certain complete insurance coverage.

Including The Release Agent

Powdered or fluid release agents offer two crucial functions: They impart subtle color contrast while serving as a bond breaker to prevent the imprinting mats or skins from adhering to the concrete and interrupting the imprint texture. The most effective method to apply a powdered launch is with a dry tampico brush about 8 inches vast. Dip the brush into the jug of launch and fluff it to load the bristles and coat them uniformly. After that take the brush by the deal with, holding it below belt level, and utilize your wrist to flick the launch into the surface in a light, consistent layer.

To apply a liquid release agent, utilize a pump-type sprayer to apply the launch in an uniform layer onto the surface of the concrete right before you stamp. If you plan to utilize a tinted liquid release agent, include the tint a day or more in advance ideally. This will certainly allow the pigment fragments to totally dissolve.

Inspecting If The Concrete Is Ready?

Before you start inscribing, check to see that the concrete has gotten to the best stage of plasticity. If you start imprinting prematurely, the concrete will not be strong sufficient to support the weight of employees or hold a distinct imprint. If you begin inscribing too late, not just will inscribing call for more job, you’ll create little or no appearance with the imprint stamps, especially as you get to completion of the task. Press your fingers into the concrete surface at numerous areas on the concreted location. If you leave a clean imprint about 3/16 to 1/4 inch deep, you can typically start imprinting. Another test is to place a stamp on the concrete and action on it. The stamp must hold your weight and not move around or sink too deeply right into the surface.

Prior to imprinting, pretexture along the border of the concreted location with a texturing skin or flex mat.

Pretexture The Concreted Area Perimeter

Pretexture along the border sides of the concreted area concerning 6 to 12 inches internal with a texturing skin or flex floor covering. This action is necessary because when you’re collaborating with a nonflexible stamp, the tool will overlap the edge of the type and you wonâEUR ™ t be able to completely dispirit it right into the concrete surface area. By pretexturing the perimeter initially, you’ll obtain the appearance you require and the complete shade from the release.

The First Row Of Imprint Stamps

As soon as the sides are pretextured, the staff could begin imprinting the rest of the concreted location with the mat tools. Typically, you must stamp in the exact same series that you positioned and ended up the concrete. As an example, if you started placing the concrete in the top left-hand edge of the concreted area and upright the lower best corner, this would certainly be the preferred series to use for finishing and inscribing procedures, working row by row from the beginning point to the end point. A lot of stamp sets are labeled with letters or numbers. Constantly set up the imprint stamps in the sequence recommended by the supplier, such as ‘A’, ‘B’, ‘C’ or ‘1’, ‘2’, ‘3’.

It’s crucial to position the first row of imprint stamps on a straight line because that will certainly act as the criteria for the rest of the job. If it’s not completely right, the rest of the rows will be out of positioning also. Make use of a string line as a guide, specifically for straightening stamp patterns that are square or rectangular. For scratched or uneven stamp patterns, you can inspect placement by using the side kind as a reference point (thinking that it’s square). Make use of a string line or measuring tape and run it from the side of the form to the top and bottom sides of the stamp floor covering to earn sure the tool is running square relative to the type.

The Imprinting Sequence

If the concrete is at the perfect phase for imprinting, you should have the ability to impress the imprint stamps right into the surface area by just strolling on the tools, potentially followed by a light tamping. The inscribing team must complete the first row prior to moving on to the second one. Commonly, a single person will certainly put the starter tools and base on them while grabbing imprint stamps from the first row and leapfrogging them right into the following row. While he or she is moving and progressing the tools, another individual could do the tamping. Depending on the stamp pattern, a third individual may be had to detail the grout joints.

Called For Detailing Work

Also if you have actually pretextured the sides and used a flex mat against wall surfaces, you will typically find it required to do some detailing with a hand chisel, roller, or texture skin to remove displaced concrete paste that turns up via the joints between imprint stamps, to deal with any kind of obscured pattern lines, and to correct cement joints where the stamp wasn’t tamped down with sufficient stress. With the majority of stamp patterns, you’ll achieve far better results if you detail the very same day, either as the imprint stamps are being advanced or prior to going home at the end of the day. For retouching or taking care of small surface flaws, you could use a structure skin as an eraser to remedy disproportion or nonuniformity by patting it right into the area until it’s degree and then reimprinting with the appropriate floor covering tool.

Removal Of Excess Release Agent And Addition Of Curing Compound

If you’ve applied a tinted launch powder to the concrete surface, you cannot use a curing compound till you wash off the residual release agent-a minimum of someday and in many cases two or three days later on, depending on climate condition. Once the surface area is sufficiently cleansed and allowed to dry, you can after that spray on a liquid membrane-forming healing compound or a cure and seal to maintain wetness in the concrete. If you’re making use of a clear or colored fluid launch, you can typically use the treating membrane to the concreted location the exact same day. Inspect the release manufacturer’s suggestions for healing.

Including Joints

Cutting tightening joints (likewise called control joints) at the appropriate depth and spacing in the concreted location right after placement gives stress and anxiety alleviation at planned areas and avoids unrestrained arbitrary cracking. You can create joints in the concrete as it begins to set making use of a groover or you can wait to cut the joint up until after the concrete has actually set utilizing a saw equipped with a diamond or rough blade. Normally, a sawed joint is less recognizable compared to grooving.

Adding Sealant

As soon as the concreted area has treated completely, you must use a coating coat of sealer. The majority of producers advise using the sealant a number of weeks later on, after a light surface cleaning. Beware not to apply the sealant also greatly, which might trap dampness in the concreted area. One of the most efficient techniques for using sealer is to integrate both spraying and rolling, especially when the stamped pattern has deep cement lines. Going back over the surface area with a roller where needed helps to distribute the sealant consistently.

Pattern Imprinted Paving Tips

Here are some valuable tips:

  • If you’re utilizing a new stamp pattern for the first time, practice with the devices on compressed sand before using them in concrete;
  • Stay clear of pattern repetition, specifically with patterns that imitate all-natural materials such as stone or slate. An arbitrary composition will look a lot more practical;
  • You’ll improve outcomes if you prerequisite, or layer, your stamp mats with several of the launch agent. This will certainly provide extra bond breaking to help make sure a clean imprint;
  • To obtain a random antiquing result, apply a really small amount of powdered release to the surface area of the concrete and afterwards spray the fluid launch over the top of it. The liquid liquifies the light layer of powder to leave subtle accents after the surface area is stamped;
  • Make certain the launch agent obtains well-compressed into the concrete by the stamp. Or else, it will just wash off the surface area without leaving the wanted colour;
  • Periodically inspect the alignment of the imprint stamps every number of rows making use of a string line. It’s not uncommon for imprint stamps to change as high as 1/4 inch each row, specifically on sloped locations;
  • On lots of tasks, you’ll be confronted with having to stamp up against an upright surface, such as a wall surface or a column. Utilize a drooping mat and texturing to bend or flex up against these surfaces;
  • Make sure that the individual strolling on and moving the imprint stamps is wearing clean boots or work shoes, devoid of any kind of stones, mud, or various other particles.
  • Certainly, these impurities will wind up on top of the imprint stamps and fall onto the fresh concrete surface area as the imprint stamps are being raised;
  • If you’re utilizing a powdered release, you can conserve time by sawcutting the contraction joints prior to eliminating the release. This allows you to eliminate the launch deposit and the dirt developed from sawing in one action.
Call Now Button