Imprinted Concrete Tallaght


Patterned Imprinted Concrete Driveways Tallaght


With over 10 years of encounter in concrete market, PaveLink Concrete has been providing best and top quality concrete services in really competitve price tag in all over Tallaght places . Depending on a Tallaght area We can help you with any concrete services be it New Concrete Driveway paving ,Patterned Driveway or Stenciled Concrete Driveways ,Coloured Concrete Driveways or Concrete Driveways Repairing. Give us a call for our no obligation free quote for any of your concrete services. We are a Totally Licensed, Insured & Family Owned Concreting Business.

Hi, this is Chris I’m the owner of concrete driveways Tallaght
Thanks for checking out my website. I guess you’re thinking of installing a concrete driveway concrete pathway or maybe even a concrete slab. There’s no doubt that a good quality concrete driveway, constructed properly with steel reinforcement adds immense value to your home and will bring years of practical enjoyment and use. In fact just recently one customer who hired our concrete driveways Tallaght company to install a beautiful new concrete driveway sold his home for over 58,000 euro more than he expected! The agent said the new concrete driveway “made all the difference”.


The Patterned Imprinted Concrete Driveways Design Specialists are a Licensed & Insured Company of Experienced Driveway Designers and Master Tradesmen who’ve been installing impressive, high good quality driveways for happy clients in Tallaght for the last 10 years. Recognized for their excellence in Superior Good quality Decorative Driveways Of All Styles, colours and patterns.

Concrete Driveways
Add value and appeal to your driveway.

Stamped Driveway
Stamped Concrete Driveway – Create designs and patterns that leave behind realistic slate impressions.

Stenciled Concrete
Stenciled Concrete – Designed to resemble brick, slate, flagstone, stone & tile achieving a high-end finish.

Spraytech – Council preferred concrete resurfacing contractor.

Concrete Resurfacing – a cost-effective way to dramatically enhance any concrete surface.

The Concrete Design Specialists focus on attention to detail, which is why their workmanship is superior compared to others.
They take pride in providing Attractive, Durable and Strong Driveways, guaranteeing you the highest top quality materials & workmanship.

PaveLink Creating Tallaght Driveways & Servicing Tallaght for the last 10, years with 20yrs in the concrete market There is no doubt that a properly constructed driveway will add immense value (in most cases) to your largest asset, your home. Concrete driveways permanently improve the property’s appearance & they are a low maintenance option. So, if you are thinking of installing a concrete driveway or a concrete pathway, sealing a concrete driveway or even need a concrete slab, And I’m sure you will have some questions about costs, so please feel free to contact me.

We’re Tallaght Very best Concrete Driveways Contractors Company

Our concrete driveways are designed to perform well for many years to come and to always look their most effective. To this end, we have become real experts in the field of decorative concrete driveways. Decorative concrete will provide a professional long lasting appearance and these days, you are only limited by your imagination. If you want the unique look of conventional floor tiles, brick or block paving, and other custom finishes, it can be achieved quickly and cost-effectively. And the best part is that as well as a distinctive contemporary look, you’ll have the added advantage of no weeds growing through the cracks. We can show you some amazing designs according to Concrete Stencilling, Stamped Concrete (available in a range of patterns and textures) and Coloured Concrete in a wide choice of modern colours

Pavelink Concreting Services Include:

Concrete Slabs Concrete Driveways Stencil Concrete Retaining Walls Concrete Cleaning
Stamped Concrete Decorative Concrete Concrete Sealing Concrete Stencilling Pattern Concrete
Driveway Cleaning Driveway Sealing Coloured Concrete And much more!

Our Commitment To You

We provide you peace of mind with our “7 Year Works Guarantee“.
We offer friendly service and guidance.
All works have total excellent control and direct supervision
You are provided with direct mobile contact 24/7 to their dedicated works supervisor.
We engage only the very best tradesmen & materials.
We work within strict time-limits (Yes…that’s your time limits).
We do everything possible to meet your expectations.
All our staffs are highly qualified clean, skilled, Friendly, professional, and well mannered .
PaveLink are expert Concreters with years of expertise, able to fulfill all your concreting needs.We do all kind of concrete work such as driveways paths extensions all finishes on concrete e.g(colour, stamp or stencil), house slabs garages retaining walls,commercial and industrial.Also we do all excavation work including pier holes,concrete repair and resurfacing.
House slabs start soon after plans are received we take care and great pride in our work, everything done professionally.

  • We are a family owned business with more than 10 years of experiences.
  • We are fully licensed and insured. We also take care of council approvals.
  • We will send no obligation s written quotes!
  • We give advice on the greatest way to approach a job E.G (old driveways to new driveways)
  • All jobs sites are left tidy and clean after work has been completed .
  • For commercial and industrial job site we’re fully insured and all members are in possession of green cards.
  • Our Prices are Competitive And Reasonable .

Tallaght (/ˈtælə/ TAL-ə; Irish: Tamhlacht, IPA: [ˈt̪ˠəul̪ˠəxt̪ˠ]) is the largest town, and county seat, of South Dublin, Ireland. The village area, dating from at least the 1st century, held one of the earliest settlements known in the southern part of the island, and one of medieval Ireland’s more important monastic centres.[2]

Up to the 1960s Tallaght was little more than a small village in County Dublin, linked to several nearby rural areas which were part of the large civil parish of the same name – the local council estimates the then population at 2,500.[3] Suburban development began in the 1970s and a town centre area has been developing since the late 1980s. There is no legal definition of the boundaries of Tallaght, but the electoral divisions known as “Tallaght” followed by the name of a locality have, according to the 2016 census, a population of 76,119,[1] up from 69,454 over five years.[4][5] There have been calls in recent years for Tallaght to be declared a city.[6]

A Guide to Pattern Imprint Concrete for your Driveway


Detailed Guide To: How To Sucessfully Imprint Concrete

There are numerous of actions involved in inscribing concrete, and just a tiny time framework within which to obtain them done. This is not such as when applying a decorative finishing or tarnish to concrete paving, those that perform the work need to finish the entire pattern inscribed approach before the fresh concrete sets. To do the task well, specialists need to be experienced, arranged, and very ready. For big tasks specifically, that indicates diagraming the inscribing format in advance, having the imprinting devices aligned and prepared to go, and making sure enough labor is offered for the job available.

Including Colour Hardener

After the concrete gets to the right stage of plasticity (normally when no bleedwater is on the surface), relayed the color hardener by tossing it onto the surface from midsection degree or a bit reduced to reduce the amount of material that drifts into the air. Job from the center of the concreted location and back towards the edge creates to prevent a hefty build-up of shade hardener on the brink. After the very first shake of shade hardener has been related to the surface, provide it five to 10 minutes to soak up water from the concrete and then float it right into the surface. Right after bull drifting the very first application of shade hardener, comply with the same steps and use a 2nd layer of hardener to make certain total coverage.

Adding The Release Agent

Powdered or fluid launch agents serve two important objectives: They impart subtle color contrast while serving as a bond breaker to avoid the imprinting mats or skins from sticking to the concrete and interrupting the imprint texture. The very best way to use a powdered release is with a completely dry tampico brush regarding 8 inches broad. Dip the brush into the jug of launch and fluff it to pack the bristles and coat them equally. Then take the brush by the handle, holding it listed below belt degree, and use your wrist to flick the launch into the surface in a light, uniform layer.

To apply a liquid launch agent, make use of a pump-type sprayer to apply the release in a consistent layer into the surface area of the concrete right before you stamp. If you prepare to utilize a colored liquid launch agent, include the tint a day or 2 beforehand if possible. This will certainly permit the pigment fragments to fully liquify.

Checking If The Concrete Is Ready?

Before you start imprinting, examine to see that the concrete has actually reached the best phase of plasticity. If you start imprinting prematurely, the concrete won’t be strong adequate to support the weight of workers or hold a distinct imprint. If you begin inscribing too late, not just will imprinting need even more job, you’ll generate little or no appearance with the imprint stamps, especially as you reach the end of the job. Press your fingers right into the concrete surface at numerous areas on the concreted location. If you leave a clean imprint concerning 3/16 to 1/4 inch deep, you could generally start imprinting. An additional examination is to place a stamp on the concrete and step on it. The stamp needs to hold your weight and not move around or sink also deeply into the surface area.

Prior to inscribing, pretexture along the perimeter of the concreted area with a texturing skin or flex mat.

Pretexture The Concreted Area Perimeter

Pretexture along the border edges of the concreted location about 6 to 12 inches inward with a texturing skin or flex floor covering. This step is necessary due to the fact that when you’re working with a nonflexible stamp, the device will certainly overlap the edge of the type and you wonâEUR ™ t have the ability to completely dispirit it right into the concrete surface area. By pretexturing the perimeter initially, you’ll obtain the structure you need and the full shade from the release.

The First Row Of Imprint Stamps

Once the edges are pretextured, the staff can start imprinting the rest of the concreted area with the mat tools. Generally, you should mark in the same sequence that you placed and finished the concrete. For instance, if you began putting the concrete in the leading left-hand edge of the concreted area and upright the bottom best corner, this would be the recommended series to make use of for finishing and inscribing operations, working row by row from the beginning point to completion point. A lot of stamp sets are classified with letters or numbers. Always set up the imprint stamps in the series suggested by the supplier, such as ‘A’, ‘B’, ‘C’ or ‘1’, ‘2’, ‘3’.

It’s essential to put the initial row of imprint stamps on a straight line since that will certainly act as the standard for the rest of the work. If it’s not perfectly right, the remainder of the rows will run out alignment too. Use a string line as a guide, specifically for lining up stamp patterns that are square or rectangular. For notched or irregular stamp patterns, you can check alignment by utilizing the edge kind as a recommendation point (thinking that it’s square). Use a string line or measuring tape and run it from the side of the kind to the leading and lower edges of the stamp floor covering making certain the device is running square relative to the type.

The Imprinting Sequence

If the concrete goes to the suitable phase for imprinting, you must be able to excite the imprint stamps right into the surface by just strolling on the devices, perhaps followed by a light tamping. The imprinting crew should complete the initial row before moving on to the second one. Normally, one person will position the starter tools and depend on them while grabbing imprint stamps from the first row and leapfrogging them into the following row. While he or she is moving and progressing the devices, another individual could do the tamping. Relying on the stamp pattern, a 3rd person may be should information the cement joints.

Required Detailing Work

Also if you have pretextured the sides and used a flex mat versus wall surfaces, you will usually locate it necessary to do some outlining with a hand sculpt, roller, or texture skin to get rid of displaced concrete paste that shows up via the joints in between imprint stamps, to take care of any kind of obscured pattern lines, and to remedy cement joints where the stamp wasn’t tamped down with enough pressure. With most stamp patterns, you’ll accomplish far better outcomes if you detail the same day, either as the imprint stamps are being progressed or prior to going house at the end of the day. For touching up or repairing small surface area problems, you can use an appearance skin as an eraser to correct disproportion or nonuniformity by patting it right into the area up until it’s degree and then reimprinting with the ideal floor covering device.

Removal Of Excess Release Agent And Addition Of Curing Compound

If you’ve used a tinted release powder to the concrete surface, you can not use a healing compound up until you wash off the residual release agent-a minimum of eventually and in many cases two or 3 days later, relying on weather. Once the surface area is adequately cleaned and permitted to dry, you could after that spray on a fluid membrane-forming curing compound or a remedy and seal to maintain wetness in the concrete. If you’re utilizing a clear or colored fluid release, you can generally use the curing membrane to the concreted area the very same day. Check the launch maker’s suggestions for treating.

Including Joints

Cutting contraction joints (likewise called control joints) at the correct depth and spacing in the concreted location not long after placement provides stress and anxiety relief at prepared places and prevents unchecked random splitting. You could form joints in the concrete as it begins to establish utilizing a groover or you could wait to cut the joint until after the concrete has set utilizing a saw outfitted with a ruby or unpleasant blade. Generally, a sawed joint is less noticeable compared to grooving.

Adding Sealant

As soon as the concreted location has actually healed completely, you ought to use a coating layer of sealer. The majority of makers advise applying the sealant numerous weeks later, after a light surface cleaning. Take care not to apply the sealer too greatly, which can catch wetness in the concreted location. One of one of the most efficient methods for using sealant is to incorporate both spraying and rolling, particularly when the stamped pattern has deep cement lines. Going back over the surface with a roller where necessary helps to distribute the sealer consistently.

Pattern Imprinted Paving Tips

Right here are some beneficial ideas:

  • If you’re using a brand-new stamp pattern for the very first time, exercise with the tools on compressed sand prior to utilizing them in concrete;
  • Stay clear of pattern repetition, specifically with patterns that mimic all-natural products such as stone or slate. An arbitrary structure will look a lot more practical;
  • You’ll improve outcomes if you prerequisite, or layer, your stamp mats with several of the launch agent. This will supply added bond breaking to help make sure a clean imprint;
  • To obtain an arbitrary antiquing result, apply an extremely small amount of powdered launch to the surface area of the concrete then spray the fluid release over the top of it. The liquid liquifies the light layer of powder to leave refined accents after the surface is stamped;
  • Be sure the release agent obtains well-compressed into the concrete by the stamp. Otherwise, it will merely wash off the surface area without leaving the preferred colour;
  • Periodically inspect the alignment of the imprint stamps every few rows making use of a string line. It’s not unusual for imprint stamps to shift as long as 1/4 inch per row, particularly on sloped areas;
  • On lots of work, you’ll be confronted with needing to mark against an upright surface, such as a wall or a column. Use a floppy floor covering and texturing to bend or bend against these surface areas;
  • Be sure that the individual strolling on and moving the imprint stamps is putting on clean boots or job shoes, free of any pebbles, mud, or various other particles.
  • Undoubtedly, these contaminants will certainly wind up on top of the imprint stamps and fall into the fresh concrete surface area as the imprint stamps are being raised;
  • If you’re using a powdered release, you can conserve time by sawcutting the tightening joints before getting rid of the release. This enables you to get rid of the release deposit and the dirt created from sawing in one step.
Call Now Button