Imprinted Concrete Nobber


Patterned Imprinted Concrete Driveways Nobber


With over 10 years of encounter in concrete market, PaveLink Concrete has been providing best and top quality concrete services in really competitve price tag in all over Nobber places . Depending on a Nobber area We can help you with any concrete services be it New Concrete Driveway paving ,Patterned Driveway or Stenciled Concrete Driveways ,Coloured Concrete Driveways or Concrete Driveways Repairing. Give us a call for our no obligation free quote for any of your concrete services. We are a Totally Licensed, Insured & Family Owned Concreting Business.

Hi, this is Chris I’m the owner of concrete driveways Nobber
Thanks for checking out my website. I guess you’re thinking of installing a concrete driveway concrete pathway or maybe even a concrete slab. There’s no doubt that a good quality concrete driveway, constructed properly with steel reinforcement adds immense value to your home and will bring years of practical enjoyment and use. In fact just recently one customer who hired our concrete driveways Nobber company to install a beautiful new concrete driveway sold his home for over 58,000 euro more than he expected! The agent said the new concrete driveway “made all the difference”.


The Patterned Imprinted Concrete Driveways Design Specialists are a Licensed & Insured Company of Experienced Driveway Designers and Master Tradesmen who’ve been installing impressive, high good quality driveways for happy clients in Nobber for the last 10 years. Recognized for their excellence in Superior Good quality Decorative Driveways Of All Styles, colours and patterns.

Concrete Driveways
Add value and appeal to your driveway.

Stamped Driveway
Stamped Concrete Driveway – Create designs and patterns that leave behind realistic slate impressions.

Stenciled Concrete
Stenciled Concrete – Designed to resemble brick, slate, flagstone, stone & tile achieving a high-end finish.

Spraytech – Council preferred concrete resurfacing contractor.

Concrete Resurfacing – a cost-effective way to dramatically enhance any concrete surface.

The Concrete Design Specialists focus on attention to detail, which is why their workmanship is superior compared to others.
They take pride in providing Attractive, Durable and Strong Driveways, guaranteeing you the highest top quality materials & workmanship.

PaveLink Creating Nobber Driveways & Servicing Nobber for the last 10, years with 20yrs in the concrete market There is no doubt that a properly constructed driveway will add immense value (in most cases) to your largest asset, your home. Concrete driveways permanently improve the property’s appearance & they are a low maintenance option. So, if you are thinking of installing a concrete driveway or a concrete pathway, sealing a concrete driveway or even need a concrete slab, And I’m sure you will have some questions about costs, so please feel free to contact me.

We’re Nobber Very best Concrete Driveways Contractors Company

Our concrete driveways are designed to perform well for many years to come and to always look their most effective. To this end, we have become real experts in the field of decorative concrete driveways. Decorative concrete will provide a professional long lasting appearance and these days, you are only limited by your imagination. If you want the unique look of conventional floor tiles, brick or block paving, and other custom finishes, it can be achieved quickly and cost-effectively. And the best part is that as well as a distinctive contemporary look, you’ll have the added advantage of no weeds growing through the cracks. We can show you some amazing designs according to Concrete Stencilling, Stamped Concrete (available in a range of patterns and textures) and Coloured Concrete in a wide choice of modern colours

Pavelink Concreting Services Include:

Concrete Slabs Concrete Driveways Stencil Concrete Retaining Walls Concrete Cleaning
Stamped Concrete Decorative Concrete Concrete Sealing Concrete Stencilling Pattern Concrete
Driveway Cleaning Driveway Sealing Coloured Concrete And much more!

Our Commitment To You

We provide you peace of mind with our “7 Year Works Guarantee“.
We offer friendly service and guidance.
All works have total excellent control and direct supervision
You are provided with direct mobile contact 24/7 to their dedicated works supervisor.
We engage only the very best tradesmen & materials.
We work within strict time-limits (Yes…that’s your time limits).
We do everything possible to meet your expectations.
All our staffs are highly qualified clean, skilled, Friendly, professional, and well mannered .
PaveLink are expert Concreters with years of expertise, able to fulfill all your concreting needs.We do all kind of concrete work such as driveways paths extensions all finishes on concrete e.g(colour, stamp or stencil), house slabs garages retaining walls,commercial and industrial.Also we do all excavation work including pier holes,concrete repair and resurfacing.
House slabs start soon after plans are received we take care and great pride in our work, everything done professionally.

  • We are a family owned business with more than 10 years of experiences.
  • We are fully licensed and insured. We also take care of council approvals.
  • We will send no obligation s written quotes!
  • We give advice on the greatest way to approach a job E.G (old driveways to new driveways)
  • All jobs sites are left tidy and clean after work has been completed .
  • For commercial and industrial job site we’re fully insured and all members are in possession of green cards.
  • Our Prices are Competitive And Reasonable .

Nobber (Irish: an Obair, meaning “the work” – referring to a moat around a Norman castle)[1] is a village in north County Meath, Ireland.The village is located near a river called the Dee (from Irish Abha Fherdiea, meaning ‘river of Ferdia’) and near Whitewood Lake, which is situated in the townland of Whitewood. It is on the Navan–Kingscourt road (R162) about 12 miles (19 km) north of Navan. This places the village about 37 miles (60 km) from the M50 motorway ; the orbital motorway of Dublin. The town of Kells is to the west and the town of Ardee to the east and the town of Kingscourt is to the north. Villages that border the parish are Kilmainhamwood, Moynalty and Kilbeg to the west, Castletown to the south and Drumconrath and Lobinstown to the east.

A Guide to Pattern Imprint Concrete for your Driveway


Step By Step Overview of: How To Sucessfully Imprint Concrete

There are several of steps associated with inscribing concrete, and just a tiny time framework within which to get them done. This is not such as when using a decorative finishing or tarnish to concrete paving, those who execute the job need to complete the entire pattern inscribed technique before the fresh concrete collections. To do the job well, contractors should be experienced, arranged, and extremely ready. For huge tasks particularly, that means diagraming the imprinting layout in advance, having the inscribing devices lined up and all set to go, and ensuring sufficient labor is available for the work handy.

Adding Colour Hardener

After the concrete reaches the best phase of plasticity (typically when no bleedwater gets on the surface), transmitted the color hardener by tossing it onto the surface area from waist degree or a little bit reduced to lessen the amount of material that wanders right into the air. Work from the center of the concreted area and back towards the edge creates to avoid a hefty accumulation of color hardener on the brink. After the first shake of color hardener has actually been related to the surface, offer it 5 to 10 minutes to take in water from the concrete and afterwards drift it right into the surface area. Right after bull floating the first application of shade hardener, follow the exact same steps and apply a second layer of hardener to make certain full coverage.

Including The Release Agent

Powdered or fluid release agents serve 2 vital objectives: They impart refined color contrast while functioning as a bond breaker to prevent the imprinting floor coverings or skins from sticking to the concrete and disturbing the imprint texture. The best way to apply a powdered launch is with a completely dry tampico brush regarding 8 inches large. Dip the brush right into the pail of launch and fluff it to load the bristles and layer them evenly. Then take the brush by the deal with, holding it below belt degree, and utilize your wrist to flick the release onto the surface in a light, uniform layer.

To use a liquid launch agent, make use of a pump-type sprayer to use the release in a consistent layer onto the surface area of the concrete right prior to you stamp. If you intend to use a colored liquid launch agent, add the tint a day or two in advance preferably. This will certainly permit the pigment bits to completely dissolve.

Checking If The Concrete Is Ready?

Prior to you begin imprinting, examine to see that the concrete has reached the right stage of plasticity. If you start imprinting prematurely, the concrete won’t be strong adequate to support the weight of workers or hold a distinct imprint. If you begin inscribing too late, not just will inscribing need even more job, you’ll create little or no texture with the imprint stamps, particularly as you get to the end of the job. Press your fingers right into the concrete surface area at several locations on the concreted area. If you leave a clean imprint about 3/16 to 1/4 inch deep, you could generally start inscribing. Another examination is to position a stamp on the concrete and step on it. The stamp ought to hold your weight and not glide around or sink also deeply into the surface area.

Before imprinting, pretexture along the boundary of the concreted location with a texturing skin or flex floor covering.

Pretexture The Concreted Area Perimeter

Pretexture along the perimeter sides of the concreted location concerning 6 to 12 inches internal with a texturing skin or flex mat. This step is very important because when you’re working with a nonflexible stamp, the tool will certainly overlap the side of the kind and you wonâEUR ™ t be able to fully dispirit it right into the concrete surface. By pretexturing the boundary first, you’ll obtain the appearance you need and the complete color from the release.

The First Row Of Imprint Stamps

As soon as the edges are pretextured, the team could begin inscribing the rest of the concreted location with the mat tools. Normally, you should stamp in the same series that you positioned and finished the concrete. For example, if you began positioning the concrete in the leading left-hand edge of the concreted location and upright the lower appropriate corner, this would be the recommended sequence to utilize for ending up and imprinting procedures, functioning row by row from the starting point to the end factor. Many stamp sets are classified with letters or numbers. Always arrange the imprint stamps in the series advised by the producer, such as ‘A’, ‘B’, ‘C’ or ‘1’, ‘2’, ‘3’.

It’s essential to place the very first row of imprint stamps on a straight line because that will certainly work as the benchmark for the rest of the work. If it’s not perfectly directly, the remainder of the rows will run out placement also. Make use of a string line as a guide, especially for lining up stamp patterns that are square or rectangular. For scratched or irregular stamp patterns, you could inspect positioning using the edge kind as a recommendation point (assuming that it’s square). Use a string line or measuring tape and run it from the edge of the kind to the leading and bottom edges of the stamp floor covering to earn certain the device is running square about the kind.

The Imprinting Sequence

If the concrete is at the suitable phase for imprinting, you must be able to impress the imprint stamps into the surface area by merely walking on the tools, perhaps followed by a light tamping. The imprinting staff ought to complete the first row prior to moving on to the second one. Normally, someone will certainly position the starter tools and depend on them while grabbing imprint stamps from the initial row and leapfrogging them right into the following row. While this person is moving and progressing the tools, an additional individual could do the tamping. Depending upon the stamp pattern, a 3rd person may be had to information the grout joints.

Required Detailing Work

Even if you have actually pretextured the edges and utilized a flex mat versus walls, you will frequently discover it needed to do some detailing with a hand carve, roller, or structure skin to remove displaced cement paste that comes up with the joints between imprint stamps, to fix any type of obscured pattern lines, and to correct grout joints where the stamp wasn’t tamped down with enough stress. With a lot of stamp patterns, you’ll achieve much better results if you information the same day, either as the imprint stamps are being progressed or prior to going home at the end of the day. For retouching or dealing with minor surface problems, you could make use of a structure skin as an eraser to remedy disproportion or nonuniformity by patting it right into the area till it’s level and after that reimprinting with the ideal floor covering device.

Removal Of Excess Release Agent And Addition Of Curing Compound

If you’ve used a colored release powder to the concrete surface, you can’t use a treating compound up until you wash off the residual launch agent-a minimum of eventually and sometimes two or 3 days later, depending upon climate condition. When the surface is adequately cleaned up and allowed to completely dry, you can then spray on a liquid membrane-forming healing compound or a cure and seal to retain moisture in the concrete. If you’re utilizing a clear or tinted fluid release, you can typically use the healing membrane layer to the concreted location the very same day. Examine the release producer’s referrals for treating.

Including Joints

Cutting tightening joints (additionally called control joints) at the appropriate depth and spacing in the concreted location soon after placement supplies anxiety relief at planned locations and stops unrestrained arbitrary breaking. You could form joints in the concrete as it starts to set utilizing a groover or you can wait to cut the joint till after the concrete has set making use of a saw geared up with a diamond or abrasive blade. Usually, a sawed joint is less visible compared to grooving.

Adding Sealant

Once the concreted area has actually cured completely, you should apply a finish layer of sealant. Many makers recommend using the sealer numerous weeks later on, after a light surface area cleaning. Take care not to apply the sealer too heavily, which could trap dampness in the concreted location. One of the most efficient methods for using sealer is to incorporate both spraying and rolling, particularly when the stamped pattern has deep cement lines. Going back over the surface area with a roller where necessary aids to disperse the sealer uniformly.

Pattern Imprinted Paving Tips

Right here are some useful pointers:

  • If you’re making use of a new stamp pattern for the first time, exercise with the tools on compacted sand before utilizing them in concrete;
  • Avoid pattern repeating, particularly with patterns that simulate all-natural products such as stone or slate. An arbitrary structure will certainly look much more sensible;
  • You’ll improve results if you precondition, or layer, your stamp floor coverings with a few of the release agent. This will give added bond breaking in order to help make certain a clean imprint;
  • To obtain a random antiquing result, use an extremely small amount of powdered release to the surface of the concrete then spray the fluid release over the top of it. The fluid liquifies the light layer of powder to leave refined accents after the surface is marked;
  • Make certain the release agent obtains well-compressed right into the concrete by the stamp. Or else, it will just wash off the surface without leaving the desired colour;
  • Occasionally check the alignment of the imprint stamps every number of rows utilizing a string line. It’s not unusual for imprint stamps to change as long as 1/4 inch each row, particularly on sloped locations;
  • On many jobs, you’ll be faced with needing to mark up against a vertical surface area, such as a wall or a column. Make use of a floppy mat and texturing to bend or flex up against these surfaces;
  • Be sure that the person strolling on and moving the imprint stamps is using clean boots or job shoes, without any type of pebbles, mud, or various other debris.
  • Inevitably, these pollutants will end up on top of the imprint stamps and drop onto the fresh concrete surface area as the imprint stamps are being lifted;
  • If you’re making use of a powdered release, you could save time by sawcutting the tightening joints before eliminating the release. This allows you to remove the release deposit and the dirt developed from sawing in one action.
Call Now Button