Imprinted Concrete Dunshaughlin


Patterned Imprinted Concrete Driveways Dunshaughlin


With over 10 years of encounter in concrete market, PaveLink Concrete has been providing best and top quality concrete services in really competitve price tag in all over Dunshaughlin places . Depending on a Dunshaughlin area We can help you with any concrete services be it New Concrete Driveway paving ,Patterned Driveway or Stenciled Concrete Driveways ,Coloured Concrete Driveways or Concrete Driveways Repairing. Give us a call for our no obligation free quote for any of your concrete services. We are a Totally Licensed, Insured & Family Owned Concreting Business.

Hi, this is Chris I’m the owner of concrete driveways Dunshaughlin
Thanks for checking out my website. I guess you’re thinking of installing a concrete driveway concrete pathway or maybe even a concrete slab. There’s no doubt that a good quality concrete driveway, constructed properly with steel reinforcement adds immense value to your home and will bring years of practical enjoyment and use. In fact just recently one customer who hired our concrete driveways Dunshaughlin company to install a beautiful new concrete driveway sold his home for over 58,000 euro more than he expected! The agent said the new concrete driveway “made all the difference”.


The Patterned Imprinted Concrete Driveways Design Specialists are a Licensed & Insured Company of Experienced Driveway Designers and Master Tradesmen who’ve been installing impressive, high good quality driveways for happy clients in Dunshaughlin for the last 10 years. Recognized for their excellence in Superior Good quality Decorative Driveways Of All Styles, colours and patterns.

Concrete Driveways
Add value and appeal to your driveway.

Stamped Driveway
Stamped Concrete Driveway – Create designs and patterns that leave behind realistic slate impressions.

Stenciled Concrete
Stenciled Concrete – Designed to resemble brick, slate, flagstone, stone & tile achieving a high-end finish.

Spraytech – Council preferred concrete resurfacing contractor.

Concrete Resurfacing – a cost-effective way to dramatically enhance any concrete surface.

The Concrete Design Specialists focus on attention to detail, which is why their workmanship is superior compared to others.
They take pride in providing Attractive, Durable and Strong Driveways, guaranteeing you the highest top quality materials & workmanship.

PaveLink Creating Dunshaughlin Driveways & Servicing Dunshaughlin for the last 10, years with 20yrs in the concrete market There is no doubt that a properly constructed driveway will add immense value (in most cases) to your largest asset, your home. Concrete driveways permanently improve the property’s appearance & they are a low maintenance option. So, if you are thinking of installing a concrete driveway or a concrete pathway, sealing a concrete driveway or even need a concrete slab, And I’m sure you will have some questions about costs, so please feel free to contact me.

We’re Dunshaughlin Very best Concrete Driveways Contractors Company

Our concrete driveways are designed to perform well for many years to come and to always look their most effective. To this end, we have become real experts in the field of decorative concrete driveways. Decorative concrete will provide a professional long lasting appearance and these days, you are only limited by your imagination. If you want the unique look of conventional floor tiles, brick or block paving, and other custom finishes, it can be achieved quickly and cost-effectively. And the best part is that as well as a distinctive contemporary look, you’ll have the added advantage of no weeds growing through the cracks. We can show you some amazing designs according to Concrete Stencilling, Stamped Concrete (available in a range of patterns and textures) and Coloured Concrete in a wide choice of modern colours

Pavelink Concreting Services Include:

Concrete Slabs Concrete Driveways Stencil Concrete Retaining Walls Concrete Cleaning
Stamped Concrete Decorative Concrete Concrete Sealing Concrete Stencilling Pattern Concrete
Driveway Cleaning Driveway Sealing Coloured Concrete And much more!

Our Commitment To You

We provide you peace of mind with our “7 Year Works Guarantee“.
We offer friendly service and guidance.
All works have total excellent control and direct supervision
You are provided with direct mobile contact 24/7 to their dedicated works supervisor.
We engage only the very best tradesmen & materials.
We work within strict time-limits (Yes…that’s your time limits).
We do everything possible to meet your expectations.
All our staffs are highly qualified clean, skilled, Friendly, professional, and well mannered .
PaveLink are expert Concreters with years of expertise, able to fulfill all your concreting needs.We do all kind of concrete work such as driveways paths extensions all finishes on concrete e.g(colour, stamp or stencil), house slabs garages retaining walls,commercial and industrial.Also we do all excavation work including pier holes,concrete repair and resurfacing.
House slabs start soon after plans are received we take care and great pride in our work, everything done professionally.

  • We are a family owned business with more than 10 years of experiences.
  • We are fully licensed and insured. We also take care of council approvals.
  • We will send no obligation s written quotes!
  • We give advice on the greatest way to approach a job E.G (old driveways to new driveways)
  • All jobs sites are left tidy and clean after work has been completed .
  • For commercial and industrial job site we’re fully insured and all members are in possession of green cards.
  • Our Prices are Competitive And Reasonable .

Dunshaughlin (Irish: Dún Seachlainn (Seachlann’s fort – Secular place name although there are no records of a fort here)[1] or locally Irish: Domhnach Seachnaill (St Seachnall’s Church)[2] is a town in County Meath, Ireland.

A Guide to Pattern Imprint Concrete for your Driveway


Step By Step Guide To: How To Sucessfully Imprint Concrete

There are numerous of steps associated with inscribing concrete, and only a little time framework within which to obtain them done. This is not such as when applying an ornamental finish or stain to concrete paving, those who execute the job should complete the whole pattern inscribed technique prior to the fresh concrete collections. To do the job well, contractors need to be experienced, organized, and very ready. For large tasks particularly, that means diagraming the imprinting format beforehand, having the inscribing devices aligned and prepared to go, and making certain enough labor is offered for the work handy.

Adding Colour Hardener

After the concrete reaches the best stage of plasticity (typically when no bleedwater is on the surface area), transmitted the shade hardener by tossing it into the surface area from waistline degree or a bit lower to reduce the quantity of material that wanders into the air. Work from the middle of the concreted area and back toward the edge forms to stay clear of a heavy build-up of shade hardener on the brink. After the first shake of color hardener has been related to the surface, provide it five to 10 mins to take in water from the concrete and then float it right into the surface area. Right after bull drifting the very first application of shade hardener, adhere to the same steps and use a second layer of hardener to make certain complete protection.

Adding The Release Agent

Powdered or fluid launch agents serve two important objectives: They impart subtle color comparison while acting as a bond breaker to avoid the imprinting floor coverings or skins from sticking to the concrete and disturbing the imprint appearance. The best means to apply a powdered launch is with a completely dry tampico brush concerning 8 inches vast. Dip the brush right into the pail of release and fluff it to fill the bristles and layer them uniformly. Then take the brush by the manage, holding it below belt degree, and utilize your wrist to flick the release into the surface in a light, uniform layer.

To use a fluid release agent, make use of a pump-type sprayer to use the launch in an uniform layer onto the surface area of the concrete right before you mark. If you intend to use a tinted liquid launch agent, include the tint a day or more ahead of time when possible. This will enable the pigment fragments to totally dissolve.

Checking If The Concrete Is Ready?

Prior to you begin imprinting, inspect to see that the concrete has actually reached the right phase of plasticity. If you start imprinting prematurely, the concrete will not be solid adequate to sustain the weight of employees or hold a distinct imprint. If you start imprinting far too late, not only will inscribing call for even more work, you’ll create little or no appearance with the imprint stamps, particularly as you reach the end of the work. Press your fingers into the concrete surface at several places on the concreted area. If you leave a clean imprint concerning 3/16 to 1/4 inch deep, you can generally begin inscribing. An additional test is to place a stamp on the concrete and action on it. The stamp should hold your weight and not slide around or sink too deeply into the surface.

Prior to imprinting, pretexture along the boundary of the concreted location with a texturing skin or flex floor covering.

Pretexture The Concreted Area Perimeter

Pretexture along the perimeter sides of the concreted area about 6 to 12 inches inward with a texturing skin or flex mat. This step is important since when you’re dealing with a nonflexible stamp, the device will overlap the edge of the kind and you wonâEUR ™ t have the ability to totally dispirit it right into the concrete surface area. By pretexturing the border initially, you’ll get the structure you need and the full shade from the launch.

The First Row Of Imprint Stamps

Once the edges are pretextured, the team could start inscribing the remainder of the concreted location with the floor covering devices. Usually, you must stamp in the very same series that you put and completed the concrete. For instance, if you began putting the concrete in the leading left-hand corner of the concreted area and upright the bottom ideal edge, this would certainly be the recommended sequence to utilize for ending up and imprinting procedures, working row by row from the beginning point to the end point. A lot of stamp collections are classified with letters or numbers. Always organize the imprint stamps in the series advised by the producer, such as ‘A’, ‘B’, ‘C’ or ‘1’, ‘2’, ‘3’.

It’s important to place the very first row of imprint stamps on a straight line since that will serve as the standard for the remainder of the job. If it’s not perfectly straight, the remainder of the rows will certainly be out of placement also. Make use of a string line as a guide, particularly for straightening stamp patterns that are square or rectangular. For notched or uneven stamp patterns, you could examine placement by utilizing the edge kind as a referral factor (thinking that it’s square). Utilize a string line or tape measure and run it from the edge of the kind to the leading and bottom edges of the stamp floor covering to earn certain the device is running square relative to the kind.

The Imprinting Sequence

If the concrete is at the optimal phase for imprinting, you must have the ability to impress the imprint stamps into the surface area by simply walking on the tools, perhaps adhered to by a light tamping. The imprinting staff ought to finish the initial row prior to moving on to the second one. Typically, someone will place the starter devices and depend on them while getting hold of imprint stamps from the very first row and leapfrogging them right into the next row. While he or she is moving and progressing the tools, another person could do the tamping. Depending upon the stamp pattern, a third individual may be should detail the cement joints.

Needed Detailing Work

Even if you have pretextured the sides and made use of a flex mat against wall surfaces, you will certainly often find it essential to do some detailing with a hand sculpt, roller, or texture skin to get rid of displaced concrete paste that shows up with the joints in between imprint stamps, to fix any obscured pattern lines, and to remedy grout joints where the stamp wasn’t tamped down with sufficient pressure. With many stamp patterns, you’ll achieve much better results if you detail the very same day, either as the imprint stamps are being advanced or prior to going house at the end of the day. For repairing or fixing small surface imperfections, you could use a structure skin as an eraser to deal with unevenness or nonuniformity by patting it right into the area up until it’s degree and after that reimprinting with the ideal floor covering device.

Removal Of Excess Release Agent And Addition Of Curing Compound

If you’ve applied a tinted launch powder to the concrete surface, you can not use a healing compound up until you wash off the recurring launch agent-a minimum of eventually and in many cases two or three days later on, relying on weather. Once the surface is adequately cleaned and enabled to completely dry, you could then spray on a liquid membrane-forming curing compound or a treatment and seal to keep dampness in the concrete. If you’re using a clear or colored fluid launch, you can normally apply the healing membrane layer to the concreted area the same day. Check the release producer’s referrals for treating.

Adding Joints

Cutting tightening joints (likewise called control joints) at the appropriate deepness and spacing in the concreted area soon after placement gives stress relief at prepared locations and avoids unrestrained arbitrary fracturing. You can develop joints in the concrete as it begins to establish utilizing a groover or you can wait to cut the joint till after the concrete has actually set utilizing a saw furnished with a diamond or abrasive blade. Typically, a sawed joint is much less recognizable compared to grooving.

Adding Sealant

When the concreted location has actually treated adequately, you must use a coating layer of sealant. The majority of producers advise using the sealer a number of weeks later on, after a light surface cleaning. Beware not to apply the sealant too greatly, which can trap wetness in the concreted location. Among one of the most efficient techniques for using sealant is to combine both spraying and rolling, particularly when the stamped pattern has deep grout lines. Returning over the surface area with a roller where needed assists to disperse the sealant uniformly.

Pattern Imprinted Paving Tips

Here are some helpful tips:

  • If you’re utilizing a brand-new stamp pattern for the very first time, practice with the tools on compressed sand prior to utilizing them in concrete;
  • Prevent pattern rep, specifically with patterns that resemble all-natural products such as stone or slate. An arbitrary structure will look far more reasonable;
  • You’ll get better outcomes if you precondition, or layer, your stamp floor coverings with a few of the launch agent. This will provide additional bond breaking to help ensure a clean imprint;
  • To acquire an arbitrary antiquing result, use a very small amount of powdered launch to the surface of the concrete and after that spray the liquid launch over the top of it. The liquid dissolves the light layer of powder to leave subtle accents after the surface area is stamped;
  • Be sure the release agent obtains well-compressed into the concrete by the stamp. Or else, it will just wash off the surface without leaving the desired colour;
  • Occasionally check the placement of the imprint stamps every few rows making use of a string line. It’s not unusual for imprint stamps to change as high as 1/4 inch each row, particularly on sloped areas;
  • On several jobs, you’ll be confronted with needing to mark against an upright surface, such as a wall surface or a column. Utilize a floppy floor covering and texturing to flex or bend against these surfaces;
  • Be sure that the individual walking on and moving the imprint stamps is using clean boots or work footwear, devoid of any type of pebbles, mud, or other particles.
  • Unavoidably, these pollutants will certainly end up on top of the imprint stamps and fall onto the fresh concrete surface as the imprint stamps are being raised;
  • If you’re using a powdered release, you can conserve time by sawcutting the tightening joints prior to removing the release. This enables you to get rid of the release residue and the dust produced from sawing in one action.
Call Now Button