Imprinted Concrete Dublin 22 (D22) South Dublin


Patterned Imprinted Concrete Driveways Dublin 22 (D22) South Dublin


With over 10 years of encounter in concrete market, PaveLink Concrete has been providing best and top quality concrete services in really competitve price tag in all over Dublin 22 (D22) South Dublin places . Depending on a Dublin 22 (D22) South Dublin area We can help you with any concrete services be it New Concrete Driveway paving ,Patterned Driveway or Stenciled Concrete Driveways ,Coloured Concrete Driveways or Concrete Driveways Repairing. Give us a call for our no obligation free quote for any of your concrete services. We are a Totally Licensed, Insured & Family Owned Concreting Business.

Hi, this is Chris I’m the owner of concrete driveways Dublin 22 (D22) South Dublin
Thanks for checking out my website. I guess you’re thinking of installing a concrete driveway concrete pathway or maybe even a concrete slab. There’s no doubt that a good quality concrete driveway, constructed properly with steel reinforcement adds immense value to your home and will bring years of practical enjoyment and use. In fact just recently one customer who hired our concrete driveways Dublin 22 (D22) South Dublin company to install a beautiful new concrete driveway sold his home for over 58,000 euro more than he expected! The agent said the new concrete driveway “made all the difference”.


The Patterned Imprinted Concrete Driveways Design Specialists are a Licensed & Insured Company of Experienced Driveway Designers and Master Tradesmen who’ve been installing impressive, high good quality driveways for happy clients in Dublin 22 (D22) South Dublin for the last 10 years. Recognized for their excellence in Superior Good quality Decorative Driveways Of All Styles, colours and patterns.

Concrete Driveways
Add value and appeal to your driveway.

Stamped Driveway
Stamped Concrete Driveway – Create designs and patterns that leave behind realistic slate impressions.

Stenciled Concrete
Stenciled Concrete – Designed to resemble brick, slate, flagstone, stone & tile achieving a high-end finish.

Spraytech – Council preferred concrete resurfacing contractor.

Concrete Resurfacing – a cost-effective way to dramatically enhance any concrete surface.

The Concrete Design Specialists focus on attention to detail, which is why their workmanship is superior compared to others.
They take pride in providing Attractive, Durable and Strong Driveways, guaranteeing you the highest top quality materials & workmanship.

PaveLink Creating Dublin 22 (D22) South Dublin Driveways & Servicing Dublin 22 (D22) South Dublin for the last 10, years with 20yrs in the concrete market There is no doubt that a properly constructed driveway will add immense value (in most cases) to your largest asset, your home. Concrete driveways permanently improve the property’s appearance & they are a low maintenance option. So, if you are thinking of installing a concrete driveway or a concrete pathway, sealing a concrete driveway or even need a concrete slab, And I’m sure you will have some questions about costs, so please feel free to contact me.

We’re Dublin 22 (D22) South Dublin Very best Concrete Driveways Contractors Company

Our concrete driveways are designed to perform well for many years to come and to always look their most effective. To this end, we have become real experts in the field of decorative concrete driveways. Decorative concrete will provide a professional long lasting appearance and these days, you are only limited by your imagination. If you want the unique look of conventional floor tiles, brick or block paving, and other custom finishes, it can be achieved quickly and cost-effectively. And the best part is that as well as a distinctive contemporary look, you’ll have the added advantage of no weeds growing through the cracks. We can show you some amazing designs according to Concrete Stencilling, Stamped Concrete (available in a range of patterns and textures) and Coloured Concrete in a wide choice of modern colours

Pavelink Concreting Services Include:

Concrete Slabs Concrete Driveways Stencil Concrete Retaining Walls Concrete Cleaning
Stamped Concrete Decorative Concrete Concrete Sealing Concrete Stencilling Pattern Concrete
Driveway Cleaning Driveway Sealing Coloured Concrete And much more!

Our Commitment To You

We provide you peace of mind with our “7 Year Works Guarantee“.
We offer friendly service and guidance.
All works have total excellent control and direct supervision
You are provided with direct mobile contact 24/7 to their dedicated works supervisor.
We engage only the very best tradesmen & materials.
We work within strict time-limits (Yes…that’s your time limits).
We do everything possible to meet your expectations.
All our staffs are highly qualified clean, skilled, Friendly, professional, and well mannered .
PaveLink are expert Concreters with years of expertise, able to fulfill all your concreting needs.We do all kind of concrete work such as driveways paths extensions all finishes on concrete e.g(colour, stamp or stencil), house slabs garages retaining walls,commercial and industrial.Also we do all excavation work including pier holes,concrete repair and resurfacing.
House slabs start soon after plans are received we take care and great pride in our work, everything done professionally.

  • We are a family owned business with more than 10 years of experiences.
  • We are fully licensed and insured. We also take care of council approvals.
  • We will send no obligation s written quotes!
  • We give advice on the greatest way to approach a job E.G (old driveways to new driveways)
  • All jobs sites are left tidy and clean after work has been completed .
  • For commercial and industrial job site we’re fully insured and all members are in possession of green cards.
  • Our Prices are Competitive And Reasonable .

A Guide to Pattern Imprint Concrete for your Driveway


Detailed Guide To: Ways To Sucessfully Imprint Concrete

There are several of actions involved in imprinting concrete, and only a small time frame within which to obtain them done. This is not such as when using an attractive coating or discolor to concrete paving, those who do the work should finish the whole pattern inscribed approach prior to the fresh concrete collections. To do the work well, service providers should be experienced, arranged, and very prepared. For huge jobs specifically, that suggests diagraming the inscribing layout beforehand, having the imprinting tools lined up and all set to go, and making sure adequate labor is available for the work available.

Including Colour Hardener

After the concrete gets to the ideal stage of plasticity (normally when no bleedwater is on the surface area), relayed the shade hardener by throwing it onto the surface area from waistline degree or a bit lower to reduce the quantity of product that wanders right into the air. Job from the center of the concreted area and back towards the side forms to avoid a hefty buildup of shade hardener on the edges. After the initial shake of shade hardener has been related to the surface area, give it 5 to 10 minutes to take in water from the concrete and afterwards drift it into the surface area. Right after bull drifting the very first application of color hardener, adhere to the same steps and apply a 2nd layer of hardener to make sure total insurance coverage.

Including The Release Agent

Powdered or fluid release agents offer 2 vital functions: They convey refined shade contrast while working as a bond breaker to prevent the inscribing mats or skins from staying with the concrete and interrupting the imprint texture. The very best means to apply a powdered launch is with a completely dry tampico brush about 8 inches vast. Dip the brush into the pail of release and fluff it to fill the bristles and coat them equally. After that take the brush by the take care of, holding it listed below belt level, and utilize your wrist to flick the release into the surface in a light, uniform layer.

To use a fluid launch agent, make use of a pump-type sprayer to apply the launch in a consistent layer into the surface area of the concrete right prior to you stamp. If you prepare to make use of a tinted fluid release agent, include the tint a day or more ahead of time if possible. This will certainly allow the pigment fragments to totally liquify.

Inspecting If The Concrete Is Ready?

Prior to you start inscribing, examine to see that the concrete has reached the appropriate stage of plasticity. If you begin inscribing ahead of time, the concrete will not be solid adequate to sustain the weight of workers or hold a distinct imprint. If you begin inscribing too late, not only will inscribing need more work, you’ll create little or no structure with the imprint stamps, specifically as you reach the end of the task. Press your fingers into the concrete surface at a number of areas on the concreted location. If you leave a clean imprint about 3/16 to 1/4 inch deep, you could normally begin inscribing. An additional examination is to put a stamp on the concrete and step on it. The stamp must hold your weight and not glide around or sink also deeply right into the surface area.

Prior to inscribing, pretexture along the perimeter of the concreted location with a texturing skin or flex floor covering.

Pretexture The Concreted Area Perimeter

Pretexture along the border edges of the concreted area concerning 6 to 12 inches internal with a texturing skin or flex floor covering. This step is very important since when you’re dealing with a nonflexible stamp, the device will certainly overlap the side of the form and you wonâEUR ™ t have the ability to fully depress it into the concrete surface area. By pretexturing the border first, you’ll get the appearance you require and the full shade from the release.

The First Row Of Imprint Stamps

As soon as the sides are pretextured, the crew could start inscribing the rest of the concreted location with the mat tools. Normally, you should stamp in the same sequence that you placed and completed the concrete. For instance, if you began placing the concrete in the top left-hand corner of the concreted location and ended on the bottom best corner, this would be the preferred sequence to use for ending up and inscribing procedures, working row by row from the starting point to completion point. Many stamp collections are identified with letters or numbers. Constantly prepare the imprint stamps in the sequence advised by the producer, such as ‘A’, ‘B’, ‘C’ or ‘1’, ‘2’, ‘3’.

It’s essential to put the first row of imprint stamps on a straight line since that will function as the criteria for the rest of the task. If it’s not completely directly, the remainder of the rows will certainly run out placement as well. Use a string line as an overview, particularly for straightening stamp patterns that are square or rectangle-shaped. For notched or uneven stamp patterns, you can inspect placement using the edge kind as a referral factor (assuming that it’s square). Use a string line or tape measure and run it from the side of the type to the top and bottom sides of the stamp floor covering making certain the device is running square about the kind.

The Imprinting Sequence

If the concrete goes to the ideal phase for inscribing, you should have the ability to excite the imprint stamps into the surface area by merely strolling on the tools, potentially followed by a light tamping. The inscribing staff must finish the first row before moving on to the 2nd one. Generally, one person will put the starter devices and base on them while ordering imprint stamps from the initial row and leapfrogging them right into the next row. While he or she is moving and progressing the tools, an additional individual could do the tamping. Depending upon the stamp pattern, a third person might be had to information the cement joints.

Required Detailing Work

Also if you have actually pretextured the edges and utilized a flex mat versus wall surfaces, you will usually locate it required to do some detailing with a hand sculpt, roller, or structure skin to remove displaced concrete paste that shows up with the joints in between imprint stamps, to deal with any kind of blurred pattern lines, and to correct cement joints where the stamp wasn’t tamped down with enough stress. With many stamp patterns, you’ll accomplish much better results if you detail the same day, either as the imprint stamps are being advanced or prior to going house at the end of the day. For touching up or taking care of minor surface problems, you can use a structure skin as an eraser to deal with disproportion or nonuniformity by patting it into the location up until it’s degree and afterwards reimprinting with the ideal mat device.

Removal Of Excess Release Agent And Addition Of Curing Compound

If you’ve used a tinted launch powder to the concrete surface area, you can’t apply a curing compound till you wash off the recurring release agent-a minimum of someday and sometimes 2 or 3 days later, depending upon weather conditions. As soon as the surface area is sufficiently cleansed and allowed to dry, you can then spray on a fluid membrane-forming curing substance or a cure and seal to preserve wetness in the concrete. If you’re using a clear or tinted fluid release, you could generally use the treating membrane layer to the concreted area the very same day. Check the launch supplier’s recommendations for curing.

Adding Joints

Cutting contraction joints (likewise called control joints) at the proper deepness and spacing in the concreted area soon after placement gives tension relief at intended places and prevents unrestrained random splitting. You could develop joints in the concrete as it starts to set utilizing a groover or you could wait to cut the joint until after the concrete has set using a saw equipped with a ruby or unpleasant blade. Normally, a sawed joint is less obvious than grooving.

Adding Sealant

Once the concreted location has healed adequately, you need to use a finish coat of sealer. Many suppliers advise applying the sealer a number of weeks later, after a light surface area cleaning. Beware not to apply the sealer as well greatly, which could catch dampness in the concreted location. Among one of the most efficient techniques for applying sealer is to integrate both splashing and rolling, specifically when the stamped pattern has deep grout lines. Going back over the surface with a roller where necessary aids to disperse the sealer consistently.

Pattern Imprinted Paving Tips

Here are some helpful ideas:

  • If you’re using a brand-new stamp pattern for the first time, experiment the tools on compressed sand before using them in concrete;
  • Avoid pattern repetition, particularly with patterns that simulate natural materials such as rock or slate. An arbitrary composition will certainly look much more sensible;
  • You’ll get better outcomes if you precondition, or coat, your stamp floor coverings with some of the launch agent. This will offer extra bond breaking to assist make sure a clean imprint;
  • To obtain a random antiquing impact, apply a really small amount of powdered launch to the surface of the concrete and afterwards spray the liquid launch over the top of it. The liquid dissolves the light layer of powder to leave subtle accents after the surface is marked;
  • Make sure the release agent gets well-compressed right into the concrete by the stamp. Or else, it will merely wash off the surface without leaving the wanted colour;
  • Occasionally inspect the alignment of the imprint stamps every number of rows making use of a string line. It’s not unusual for imprint stamps to change as long as 1/4 inch per row, specifically on sloped locations;
  • On several tasks, you’ll be confronted with having to mark up against a vertical surface area, such as a wall surface or a column. Utilize a floppy mat and texturing to bend or flex up against these surfaces;
  • Make certain that the person strolling on and moving the imprint stamps is wearing clean boots or job shoes, without any stones, mud, or various other debris.
  • Unavoidably, these contaminants will end up in addition to the imprint stamps and fall onto the fresh concrete surface area as the imprint stamps are being lifted;
  • If you’re utilizing a powdered launch, you could save time by sawcutting the tightening joints prior to getting rid of the launch. This permits you to remove the release residue and the dust developed from sawing in one action.
Call Now Button